Crispy Battered Fish and Chips Recipe (2024)

Fish and chips are popular pub fare all around Britain, though I had some of the best in a small seaside town called Hastings, England that my family visited years ago. The crispy golden fried pieces were made using freshly caught fish and were served wrapped in newspaper with thick-cut French fries.

This version of fish and chips is inspired by Dame NYC, an English seafood restaurant in the West Village. Their version of the classic (actually inspired by Heston Blumenthal’s version of fish and chips) has an extra crispy exterior since it’s fried with a combination of all-purpose flour, rice flour, beer and a bit of vodka.

Because both the fish and fries are best fresh and require lots of frying room, I recommend cooking the fries first then reheating them in the broiler or in the air fryer while the fish fries. The batter should be freshly made so it’s frothy and bubbly, I don’t recommend letting it sit ahead of time. It’s also crucial the oil is heated to the proper temperature to get the proper crunch. An infrared thermometer is a great buy to ensure the correct temperature.

Crispy Battered Fish and Chips Recipe

Table of contents

  • Crispy Battered Fish and Chips Recipe
    • Key Ingredients in This Recipe
    • How to Make Fish and Chips
    • Tips and Tricks for This Recipe
    • Other Recipes To Try
Crispy Battered Fish and Chips Recipe (1)

Key Ingredients in This Recipe

  • Fish – A flakey, lean white fish like cod, haddock, halibut or hake has the best texture and flavor for fish and chips. I recommend buying a local fish for the freshest tasting flavor.
  • All purpose flour – This is the most commonly used in beer-batter, using all-purpose flour alone won’t get and stay as crispy as using it in combination with another flour.
  • Rice flour – Which I use in one of my favorite fried recipes, buffalo cauliflower, has a lower moisture content and is also naturally gluten free (however I use it in addition to wheat flour in this recipe).
  • Turmeric – My brother showed me this trick years ago. Adding a bit of turmeric powder adds a beautiful golden color to the batter for perfectly golden looking fried fish in this dish.
  • Vodka – Adding a bit of vodka is the key to a crunchy exterior. Vodka evaporates more quickly than water which makes the crust perfectly crispy.
  • Beer – A simple light beer or lager (it can be cheap) is best for beer batter. You don’t want to use a beer with a flavor that is too overpowering.
  • Potatoes – In this recipe I use Russet potatoes, also known as Idaho potatoes to make the fries served alongside the beer-battered fish. They’re large, starchy, oblong potatoes known for being the ideal baking potato. When cooked they become soft and light on the inside while frying them leaves them extra crispy on the outside.

How to Make Fish and Chips

Crispy Battered Fish and Chips Recipe (2)
Step 1: Prep potatoes.

Slice the peeled potatoes into ½” (1.3cm) thick planks and cut each plank into ½” (1.3cm) fries. Add the cut fries to a large bowl filled with cold water and the vinegar and let sit for 30 minutes.

Step 2: Fry the fries once.

In a heavy-bottomed pot or Dutch oven add enough oil to reach 2” (5cm) up the pan. Heat the oil to 250ºF (130ºC). While the oil heats, drain the fries and pat completely dry. Working in batches, add a handful of the fries to the oil and fry, stirring occasionally, until cooked through, about 5 minutes.

Crispy Battered Fish and Chips Recipe (3)
Crispy Battered Fish and Chips Recipe (4)
Step 3: Increase oil temperature.

Increase the heat. Use tongs to remove the potatoes to a paper towel-lined baking sheet. Repeat with the remaining fries. Let all the fries cool to room temperature then increase the temperature of the oil to 350ºF (180ºC).

Step 4: Fry fries a second time.

Fry for a second time and season. Working in batches again, add fries to the oil and fry until golden brown and crispy, about 3 minutes. Remove to a paper towel-lined baking sheet once more to drain and season with salt.

Crispy Battered Fish and Chips Recipe (5)
Crispy Battered Fish and Chips Recipe (6)
Step 5: Prep the fish.

Cut the fish into filets. Pat dry with paper towels to remove any excess moisture. Season with salt and pepper and set aside.

Step 6: Make beer batter.

Return the oil to heat, adding additional oil to the pan if needed. Heat the oil to 400ºF (200ºC). In a large mixing bowl, whisk together the all-purpose flour, rice flour, baking powder and turmeric. Stir in the vodka followed by the lager into the flour mixture until just combined.

Crispy Battered Fish and Chips Recipe (7)
Crispy Battered Fish and Chips Recipe (8)
Step 7: Coat fish in batter.

Working a few pieces of fish at a time, dip the fish fillets in the batter and turn to coat completely. Remove the fish from the batter one piece at a time, making sure any excess batter drips off.

Step 8: Fry fish.

Add to the hot oil and fry, turning once, until crispy, golden brown and just cooked through, about 3 minutes total. Remove from the oil and let drain on a wire rack set over a paper-towel lined baking sheet. Repeat with the remaining fish.

Crispy Battered Fish and Chips Recipe (9)
Crispy Battered Fish and Chips Recipe (10)
Step 9: Serve.

Divide the fish and fries among serving plates. Serve with a lemon wedges, tartar sauce and malt vinegar.

Tips and Tricks for This Recipe

Swaps and substitutions
  • Try using store bought fries! Rather than making your own fries for the fish and chips, a great shortcut is using store bought, frozen French fries to cut down on the work and frying. Cook them in the oven or use an air fryer for extra crispy fries.
  • Try frying other types of fish using this batter! I actually really enjoy battered, fried salmon.
Troubleshooting Fried Fish
  • My fish isn’t browning. The temperature of the oil you are using to fry the fish isn’t hot enough. Make sure it’s heated thoroughly before adding the fish. Check it by using a thermometer or adding a small amount of batter to the oil, there should be lots of small bubbles. After cooking each batch, give the oil a few minutes to come back to temperature before adding more.
  • My fish isn’t cooked inside but the outside is dark. Your oil is too hot! The batter is browning too fast and the fish doesn’t have enough time to cook while the exterior is browning too fast. The best solution for this is to make sure you have a thermometer on hand.
What to Serve with Fish and Chips
  • Tartar sauce
  • Malt vinegar
  • Lemon wedge
Crispy Battered Fish and Chips Recipe (11)

Other Recipes To Try

If you enjoy this fish and chips recipe, give these recipes a try:

  • Beer Battered Baja Fish Tacos
  • Thai Fried Red Snapper
  • Pan-Seared White Fish

Crispy Battered Fish and Chips Recipe

Crispy Battered Fish and Chips Recipe (12)

PrintPin

Prep Time 30 minutes mins

Cook Time 30 minutes mins

Serves 4

US CustomaryMetric

Ingredients:

For the fries:

  • 4 large Russet potatoes (about 2½ pounds, scrubbed and peeled)
  • ¼ cup white vinegar
  • Vegetable oil, as needed, for frying
  • Kosher salt, as needed

For the battered fish:

  • pound cod or other flakey white fish
  • Kosher salt, as needed
  • Freshly ground black pepper, as needed
  • Vegetable oil, as needed, for frying
  • 1 cup all-purpose flour
  • 1 cup white rice flour
  • 2 teaspoons baking powder
  • ½ teaspoon turmeric
  • ½ cup vodka
  • cup chilled lager beer

For serving:

  • Sliced lemon, for garnish
  • Malt vinegar, as needed
  • Tartar sauce, as needed

Instructions:

For the fries:

  • Slice the peeled potatoes into ½” (1.3cm) thick planks and cut each plank into ½” (1.3cm) fries. Add the cut fries to a large bowl filled with cold water and the vinegar and let sit for 30 minutes.

  • In a heavy-bottomed pot add enough oil to reach 2” (5cm) up the pan. Heat the oil to 250ºF (130ºC). While the oil heats, drain the fries and pat completely dry. Working in batches, add a handful of the fries to the oil and fry, stirring occasionally, until cooked through, about 5 minutes.

  • Increase the heat. Use tongs to remove the potatoes to a paper towel-lined baking sheet. Repeat with the remaining fries. Let all the fries cool to room temperature then increase the temperature of the oil to 350ºF (180ºC).

  • Fry for a second time and season. Working in batches again, add fries to the oil and fry until golden brown and crispy, about 3 minutes. Remove to a paper towel-lined baking sheet once more to drain and season with salt.

For the battered fish:

  • Cut the fish into filets. Pat dry with paper towels to remove any excess moisture. Season with salt and pepper and set aside.

  • Return the oil to heat, adding additional oil to the pan if needed. Heat the oil to 400ºF (200ºC).

  • In a large mixing bowl, whisk together the all-purpose flour, rice flour, baking powder and turmeric. Stir in the vodka followed by the lager until just combined.

  • Working a few pieces of fish at a time, add to the batter and turn to coat completely. Remove the fish from the batter one piece at a time, making sure any excess batter drips off.

  • Add to the hot oil and fry, turning once, until crispy, golden brown and just cooked through, about 3 minutes total. Remove from the oil and let drain on a wire rack set over a paper-towel lined baking sheet. Repeat with the remaining fish.

For serving:

  • Divide the fish and fries among serving plates. Serve with a lemon wedge, tartar sauce and malt vinegar.

DID YOU MAKE THIS?

TAG ME ON INSTAGRAM TO BE FEATURED ON MY STORIES!@cookingwithco*cktailrings

Crispy Battered Fish and Chips Recipe (2024)

FAQs

What makes batter more crispy? ›

Rice flour and cornstarch work particularly well because they fry up crispier than wheat flour. They also absorb less moisture and fat during the frying process, making the products less greasy. This is why rice flour is often used when making tempura because it produces a very thin and crispy, dry crust.

What does baking soda do in fish batter? ›

Fish Batter Ingredients

Milk: The proteins in milk help the batter adhere to the fish and promote browning. Water: Use very cold water for the crispiest results. Baking powder: Baking powder ensures a light and crispy exterior. Salt: A teaspoon of salt enhances the overall flavor of the fish batter.

Can you make batter with just flour and water? ›

Flour and Water Batter

The simplest of all batters, this easy mix is best suited to thin fish fillets with a delicate flavor, like sole or pollock. Beat 1 cup of flour and a 1/2 teaspoon of salt into 2 cups of water.

What makes fish batter soggy? ›

If the wet batter is too thick (in consistency) your cooked batter will be thick (in depth) around the fish and tends to soak up too much oil. Too watery on the other hand and it won't coat the fish properly, and will go soggy quickly. Aim for a batter that runs but fully coats the back of a spoon – see video.

What is the best oil for crispy batter? ›

Vegetable Oil: Best All-Purpose Oil for Frying

It's great for all different methods of frying and all kinds of foods like breaded chicken and fries. Typically a blend of oils, it has a high smoke point of 400 to 450 degrees, and it has a pretty neutral flavor, which deepens the flavor of the food.

Which flour is best for crispy batter? ›

Semolina (Rawa) and rice flour is the best combination for deep frying and making food crispy. It doesn't get soggy and Semolina (Rawa) and remains crispy even after deep frying. Using rice flour along with semolina helps it to bind well with the food . It gives more flavor, tastes better and makes it crispy too.

Why add egg to fish batter? ›

Cornstarch: Cornstarch ensures an extra crispy, light fry every time. Egg: An egg creates a more delicate crust and helps seal in moisture.

Is cornstarch or baking powder better for batter? ›

To summarize, cornstarch cuts the protein content, which makes the crust lighter and crisper, baking powder provides leavening, generating air bubbles that also result in a lighter, crisper crust, and baking powder provides alkali, which allows the crust to turn golden brown via the Maillard reaction.

What does vinegar do to batter? ›

When vinegar reacts with baking soda, it creates carbon dioxide bubbles, which act as leavening agents. So as the batter bakes, these tiny bubbles expand, causing the cake to rise and giving it that light, airy texture we all love.

Why is my batter not crispy? ›

Timing. Bring it to the table immediately. Fried food in batter must be done almost in real time: the closer you get to eating it, the better. This is because the cover given by the batter and the humidity of the food quickly remove the crunchiness.

What happens if you put too much flour in batter? ›

Too Much Flour

A cake batter with too much flour will be dry, crumbly, and heavy. To avoid this, make sure you weigh your flour instead of scooping it. Although it's quick, scooping with a measuring cup can easily result in too much flour.

Should you let fish batter rest? ›

Gradually pour the beer and water into the bowl, stirring with a wooden spoon until you have a smooth, lump-free batter. Leave to rest for 30 mins while you prepare the chips.

How do you're crisp battered fish? ›

Preheat your oven to 350°F. Spread your fish in a dish or pan and cover it with loose foil if it is unbreaded. If your fish is breaded or battered, you can leave it uncovered to help return the crispiness; however, you may lose the moisture. Reheat the fish for 10-15 minutes and flip it over every 5 minutes.

Is baking soda or powder better for crispy batter? ›

Baking powder is better for recipes that contain little or no acid ingredients. Baking soda helps make fried foods crispy and light. It is also useful for cleaning and removing stains.

Why is my batter not getting crispy? ›

Keep the oil temperature up for crispy fried food

When it comes to battered foods, according to Bon Appétit, the lower the temperature, the longer your batter is sitting in the pot absorbing oil, which can lead to a dark, unappetizing oil-laden crust.

Top Articles
Latest Posts
Article information

Author: Greg O'Connell

Last Updated:

Views: 5703

Rating: 4.1 / 5 (62 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Greg O'Connell

Birthday: 1992-01-10

Address: Suite 517 2436 Jefferey Pass, Shanitaside, UT 27519

Phone: +2614651609714

Job: Education Developer

Hobby: Cooking, Gambling, Pottery, Shooting, Baseball, Singing, Snowboarding

Introduction: My name is Greg O'Connell, I am a delightful, colorful, talented, kind, lively, modern, tender person who loves writing and wants to share my knowledge and understanding with you.